Hydro Jet Plumbing and Rooting Services
We offer a combination of hydro Jetting and Rooting Service To Ensure That All Lines Are Working Properly.
Over time fats, oils, and grease (FOG) coats, thickens, and accumulates inside pipelines, leading to the hazardous and costly flow of waste grease into drainage lines, sewer lines and sewage treatment plants. Once clogging occurs this may stop your business from running daily operations. We offer combination of snaking ( rooting ) and hydro jet plumbing service to suit the best solution for all draining problems. We also offer a drain camera inspection to find and locate the location of blockage or any pipeline damage.
Hydro Jet Plumbing / Hydro Jetting
New technology designed to restore and clean thoroughly clean pipes.
Unlike
snaking / rooting, hydro jetting uses high water pressure to clean pipes
removing all build up that has accumulated inside the pipeline. To
prevent your main lines and drains from clogging or to remove pipe build
up hydro jetting is highly suggested to be done once every 3 to 9
months. Depending on the business traffic flow and the consumption
of waste and grease this may vary from one company to another. Similar
to human arteries, the more oily and greasy foods we eat our arteries
are more likely to become clogged compared to someone who does not
consume oily and fatty foods.
Hydro Jetting pipelines cleans the interior walls and eliminates waste build up that has accumulated over time. A typical rooting service can only poke through the blockage and within a few weeks the problem arises over again.
Hydro jetting plumbing process involves inserting a high pressure stream of water flowing at 15-18 gallons per minute into the pipelines to clear waste build up. Unlike snaking, hydro jetting will remove scum attached to the pipeline walls that a typical rooter cannot do.
Rooting / Snaking
In
many cases rooting can unclog the drains by cutting through the
blockage. While hydro jetting uses high water pressure to clean the
pipelines, rooting uses traditional steel cable machinery to cut out
blockages. Depending on the type of line different snake size is
used for a better results. Many plumbers do not offer hydro
jetting due to the high cost of hydro jet machines.
Therefore, snaking a line may fix the problem for the time being
but if the problem continues to arise, most likely it is time
for the line to be hydro jetted.
JR Plumbing Service
We have the latest technology available for the best solution.
Restaurants and other food servicing companies most important lines
are the kitchen and the main line leading to the sewer. It is imperative
that these lines do not get clogged or your business may suffer due to
the unpleasant odor. In addition, it is also hazardous to the
employees. Furthermore, if the main line does back up or clog, it can
cause the grease trap / interceptor to overflow which can lead to city
citations and high fines.
"At JR Grease Services, Quality is only the beginning. "
